All products


FORMODAL® 023

FORMODAL® 023 | cast plate - all sides sawn

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: 5083

Cast plates ,Very good machinability ,Excellent corrosion resistance ,Good welding properties ,Low stress and dimensionally stable

FORMODAL® 023

FORMODAL®030 | cast plate machined surface and both sides PVC coated

FORMODAL® 023

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: 5083

Cast plates ,Very good machinability ,Excellent corrosion resistance ,Good welding properties ,Low stress and dimensionally stable

EN AW-6082

EN AW-6082 | Round bar

  • Material: Aluminum
  • DIN: 3.2315
  • Material chemically EN 573-3: Al Si1 Mg Mn

 Good corrosion resistance , Good welding properties ,Curable alloy , Good machinability 

EN AW-6082

EN AW-6082 | plate rolled

  • Material: Aluminum
  • DIN: 3.2315
  • Material chemically EN 573-3: Al Si1 Mg Mn

 Good corrosion resistance , Good welding properties ,Curable alloy , Good machinability 

EN AW-7075

EN AW-7075 | plate rolled

  • Material: Aluminum
  • DIN: 3.4365
  • Material chemically EN 573-3: Al Zn5,5 Mg Cu

Curable alloy with very high strength,Very high fatigue strength,good machinability

FORMODAL®  025X cast

FORMODAL® 025X cast | cast plate - all sides sawn

  • Material: Aluminum
  • Material chemically EN 573-3: AA 5083

Reduced and controlled hydrogen content,Ultra fine metal structure ,Very good machinability,Excellent corrosion resitance ,Good welding properties ,Low stress and dimensionally stable 

Aerospace  Aluminium 7050

Aerospace Aluminium 7050 | plate rolled

  • Material: Aluminum
  • Material chemically EN 573-3: Aerospace -Aluminium 7050

Age-hardenable, high-strength alloy,best suitability for low temperature range e.g. down to - 254 °C,High fatigue strength,Very good weldability with all welding methods,Hard and soft soldering is not recommended

Aerospace  Aluminium 7075/7175

Aerospace Aluminium 7075/7175 | plate rolled

  • Material: Aluminum

EN AW-5083

EN AW-5083 | plate rolled

  • Material: Aluminum
  • DIN: 3.3547
  • Material chemically EN 573-3: Al Mg4,5 Mn0,7

Very good welding properties,Very good corrosion resistance to sea water and a normal atmosphere,Good strength properties,Cold forming in the O state (Soft annealed),Relatively low internal stresses,Relatively good core strength values even with large dimensions

EN AW-7075

EN AW-7075 | Round bar

  • Material: Aluminum
  • DIN: 3.4365
  • Material chemically EN 573-3: Al Zn5,5 Mg Cu

Curable alloy with very high strength,Very high fatigue strength,good machinability