-
FORMODAL® 07 aluminium cast plates
Aluminium cast plates based on EN AW-1050A
precision milled or rough sawnWith FORMODAL® 07 is a new material from BIKAR. The cast plate FORMODAL® 07 is characterized by very good anodising properties, very good corrosion resistance, low stress and dimensionally stable as well as good welding properties and a very high electrical conductivity as well as a very high thermal conductivity.
- EN AW-1050A (Al99,5)
Applications:
- Electronics industry
- Semiconductor industry
- Panelling in machine construction and plant construction
- Parts with a decorative surface
- Automotive parts
- Food industryy
From these materials, we manufacture:
- Sheets
- Plates
- Cuttings
- Circular blanks
- Rings
- Parts from drawings
Special features of this material:
- Precision milled or rough sawn aluminium cast plates
- Very good anodising properties
- Very good corrosion resistance
- Low stress and dimensionally stable
- Good welding properties
- Very high electrical conductivity as well as thermal conductivity
FORMODAL is a trademark of BIKAR-METALLE GmbH
Data sheets are available for download on www.bikar.com.
FORMODAL®FORMODAL® – special materials for tool making, mould making and model making - can be supplied from a tiny cube to XXL format.
FORMODAL® materials are characterised by their outstanding machining properties, low internal stresses, dimensional stability and wide range of sizes available.
Legend
FORMODAL® 07 – aluminium cast plates (EN AW-1050A | Al99,5)
BIKAR
Alloy designation
Alloy designation
TemperFORMODAL® 07
EN AW-1050A
Al99,5
O3Thickness s Length x Width (a x b) 6 - 575 mm 6.000 x 1.550 mm / 6 - 575 mm 4.500 x 1.770 mm / 6 - 575 mm 3.520 x 1.770 mm / Tolerances:
Thickness: -0/+2 mm
Length x Width: -0/+2 mmMachined plates:
Thickness mm Flatness tolerances mm* Thickness tolerance mm > 20 on request ± 0,1 Other dimensions on request.
* This specification refers to the total area; not only to sections of a plate or a pre-cut part. By dividing the surface, the flatness is not reduced proportionately.
- The milled plates are PVC coated on both sides.
- Casting alloys can contain micro pores, which particularly appear during coloured surface treatment or polishing. This is especially true for dark colours.
Surface roughness:
Ra < 0,4 μm
-