-
-
01 Start
Disclaimer
This will take you to the weight calculation
Here you can find information about BIKAR
Here you can find various contact options
- Call BIKAR (direct call)
- Send e-mail
- Save contact from BIKAR Bad Berleburg (Germany) in your address book
- Route planning
- Contact addresses for BIKAR
Basic setting mm or Inch
-
-
02 Material selection
Choose a material
If available, alternatives are suggested to you
In the following examples, we have chosen FORMODAL 023. Simply tap on it and the material is selected.
The "Search" function hides the keyboard and you can scroll through the list
-
-
03 Select shape
"Back" to material selection
Select the desired shape from the list
The "Calculate" button leads you to the input of dimensions
-
-
04 Weight calculation
"Back" to shape selection
Enter the dimensions in mm (or inches) and the quantity in the fields provided
If the basic setting is mm, the dimensions are shown in mm and the weights in kg.
If you press the "in" button here, the system calculates the mm dimensions in inches and the weights in lb.
If the basic setting is inch, the dimensions are shown in inches and the weights in lb.
If you press the "mm" button here, the system calculates the inch dimensions in mm and the weights in kg.
With the "C" button, you delete your inputs in the fields (2)
The button "Details" once again shows information about the selected material
The button "Price":
see explanations "09 Calculation"The button "Request":
Click on it if you would like to request the entered article from us. You can find out more under "06 Request"
-
-
05 Information about material
Shows you once again all details about the material.
-
-
06 Request
If you have clicked on the "Request" button, the article is added to the selection list. You have the possibility of adding one or more products to the request list.
You delete the item with the red "X"
If you have selected numerous products, but do not want to send these as a request, you can remove these by clicking on the button "Delete all".
The button "Select additional product" takes you back to the last material selected. Here you can enter other dimensions or change the quantity and add to the request. You can naturally also select a different material and a new shape.
With the button "Send request(s)", you send the request as an e-mail to BIKAR.
If you still have not entered any sender information, please read (1) and (2) under "10 Enter address".
Once you have entered your data, this remains saved in the app. The information does not have to be entered again.
Click on "Pieces" if you would like to change the quantity again here. However, dimensions can no longer be changed here.
-
-
07 Change the quantity
Change the quantity
-
-
08 Request reminder
You do not have to send your request immediately. However, the app reminds you that there are requests that have not yet been sent.
-
-
09 Calculation
The sale price cannot be provided here as this may vary depending on the current market prices and currency exchange rates, dimensions and amount. We will be happy to provide you with a quote upon request.
If you already have prices then you can enter them here. The app will then calculate the corresponding values.
Attention: there may be slight deviations due to rounding as the app calculates to two decimal places!
The "Back" button takes you to the shape selection
If you already have prices then you can enter them here.
By clicking on (3), the scroll wheel is displayed to you with numerous selection options.
Select from the options, on which the given price is based.
The price input is dependent on the shape. E.g. prices for area can also be given and calculated per m², the prices for bars are per metre, etc.
If inches were selected, the information naturally appears with the setting that was selected before.
Click on "Finished" to have the results displayed.
Info: Depending on the basic setting "mm/inch", the system switches back to the original mode when leaving the calculation.
-
-
10 Enter address
We would like to once again indicate that we only supply to companies, schools and institutions. We recommend that private interested parties visit their local retail store or DIY store.
Input window: the fields marked with "*" are "mandatory fields" and must be completed.
"Close" closes the window
"Submit" sends the request to BIKAR
In this overview you are once again shown all the products that should be requested.
You can amend your sender information at any time under:
Contact –> Send e-mail
-
-
11 - 12 Special shapes
Triangle • Parallelogram • Trapezium
"Back" to shape selection
Only logical inputs are possible.
Illogical inputs lead to a yellow symbol in the field with the error!
-
-
13 Special shapes - Half round bars
"Back" to shape selection
Volume "V1" will be calculated - the upper part of the half round bar
Click on the grey field "V1" next to kg. Volume "V2" will be calculated - the lower part of the half round bar.
The calculated volume will be shown in red in the graphic.