Brass plates

CW508L, CW612N, CW713R

Brass plates (alloys)

CW508L (Cu Zn37)
CW612N (Cu Zn39 Pb2)
CW713R (Cu Zn37 Mn3 Al2 Pb Si)

From these materials, we manufacture:

cuttings in nearly all requested lengths,
widths and thicknesses
circular blanks
rings
shaped blanks as per drawing
parts as per drawing
lifting device for heavy plates

Other alloys and dimensions on request.

Data sheets are available for download on www.bikar.com.

Standard dimensions (a x b)

Plates from 10 mm
2.020 x 1.020 mm
2.520 x 1.270 mm
3.020 x 1.520 mm

Brass

Extensive warehouse stocks of a wide variety of brass alloys ensure we stay flexible. We don‘t simply stock the standards such as Cu Zn37 or Cu Zn39 Pb.

Our portfolio also extends to special alloys such as Cu Zn37 Mn3 Al2 Pb Si, Cu Zn35 Ni3 Mn2 Al Pb and many more – stocked as bars, sheets, plates, tubes and sections.

All that glitters is not gold

At BIKAR, this old proverb applies very well to brass. We maintain vast stocks of this material. Whether for the fittings or engineering sectors – whether for release orders or a small section for fabricating a hexagon bolt. Here, diversity is the key.

Whether you need round bars from 1.5 mm in diameter, brass tubes (round or rectangular) or heavy brass plate up to 200 mm thick ...

BIKAR delivers the dimensions you need quickly and precisely.

Legend

Brass plates (CW508L | CW612N | CW713R)

EN-Norm EN-Norm DIN indication DIN alloy code thickness s	CW508L Cu Zn37 Ms63 2.0321	CW612N Cu Zn39 Pb2 Ms58 Pb2 2.0380	CW713R Cu Zn37 Mn3 Al2 Pb Si So-Ms58 Al2 2.0550
10 mm	/	/
12 mm	/	/
15 mm	/	/
20 mm	/	/	/
25 mm	/	/	/
30 mm	/	/	/
35 mm	/	/	/
40 mm	/	/	/
45 mm	/	/	/
50 mm	/	/	/
55 mm		/
60 mm		/
65 mm		/
70 mm		/
75 mm		/
80 mm		/
85 mm		/
90 mm		/
95 mm		/
100 mm		/
110 mm		/
120 mm		/
125 mm		/
130 mm		/
140 mm		/
150 mm		/
EN-Norm EN-Norm DIN indication DIN alloy code thickness s	CW508L Cu Zn37 Ms63 2.0321	CW612N Cu Zn39 Pb2 Ms58 Pb2 2.0380	CW713R Cu Zn37 Mn3 Al2 Pb Si So-Ms58 Al2 2.0550

Service-Hotline
phone +49 (0)2751 9551-140
fax +49 (0)2751 9551-555

» Contact form
Download
Delivery programme
BRASS

» DOWNLOAD
Parts from drawings
By order of the customer we manufacture non-ferrous single or standard parts according to engineering drawings, machined ready for installation.

» Parts from drawings