-
Brass sheets (alloys)
- CW508L (Cu Zn37)
- CW612N (Cu Zn39 Pb2)
- CW713R (Cu Zn37 Mn3 Al2 Pb Si)
From these materials, we manufacture:
- cuttings in nearly all requested lengths,
widths and thicknesses - circular blanks
- rings
- shaped blanks as per drawing
- parts as per drawing
- lifting device for heavy plates
Other alloys and dimensions on request.
Data sheets are available for download on www.bikar.com.
Standard dimensions (a x b)Sheets up to 9.9 mm
2.000 x 600 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
BrassExtensive warehouse stocks of a wide variety of brass alloys ensure we stay flexible. We don‘t simply stock the standards such as Cu Zn37 or Cu Zn39 Pb.
Our portfolio also extends to special alloys such as Cu Zn37 Mn3 Al2 Pb Si, Cu Zn35 Ni3 Mn2 Al Pb and many more – stocked as bars, sheets, plates, tubes and sections.
All that glitters is not gold
At BIKAR, this old proverb applies very well to brass. We maintain vast stocks of this material. Whether for the fittings or engineering sectors – whether for release orders or a small section for fabricating a hexagon bolt. Here, diversity is the key.
Whether you need round bars from 1.5 mm in diameter, brass tubes (round or rectangular) or heavy brass plate up to 200 mm thick ...
BIKAR delivers the dimensions you need quickly and precisely.
Legend
Brass sheets (CW508L | CW612N | CW713R)
EN-Norm
EN-Norm
DIN indication
DIN alloy code
thickness sCW508L
Cu Zn37
Ms63
2.0321CW612N
Cu Zn39 Pb2
Ms58 Pb2
2.0380CW713R
Cu Zn37 Mn3 Al2 Pb Si
So-Ms58 Al2
2.05500,05 mm / 0,10 mm / 0,15 mm / 0,20 mm / 0,25 mm / 0,30 mm / 0,40 mm / 0,50 mm / 0,60 mm / 0,70 mm / 0,80 mm / / 1,00 mm / / 1,20 mm / / 1,25 mm / / 1,50 mm / / 2,00 mm / / 2,50 mm / / 3,00 mm / / 4,00 mm / / 5,00 mm / / 6,00 mm / / 8,00 mm / / EN-Norm
EN-Norm
DIN indication
DIN alloy code
thickness sCW508L
Cu Zn37
Ms63
2.0321CW612N
Cu Zn39 Pb2
Ms58 Pb2
2.0380CW713R
Cu Zn37 Mn3 Al2 Pb Si
So-Ms58 Al2
2.0550 -
Parts from drawings
By order of the customer we manufacture non-ferrous single or standard parts according to engineering drawings, machined ready for installation.